Limited Time Offer!
Rental Price -$15,999.00
Rental Price -
$15,999.00
2023 Exmark Lazer Z S-Series EFI LZS749AKC604A1
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:
Eco-Friendly- Reduces fuel consumption, fewer emissions and carbon footprint.
- Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
- Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
- Delivers up to 25% in fuel savings.
- Easy start in any altitude or climate condition (no manual choke).
- Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- 2023
- Exmark
- Lazer Z S-Series EFI
- LZS749AKC604A1
- Zero-Turn Mower
- Kohler
- 747
- Series: Command™ EFI
- 3,750 RPM
- Heavy-duty canister air filtration system
- Indicator: Electronic Sender
- Gas EFI
- Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Lever-actuated disc brake.
- 24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- 24 x 12-12, 4 ply Turf Master®
- 12-volt battery with 20-amp alternator.
- Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
- Blade: Approximately 18,500 fpm.
- Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Casters: .50"
- Cutter Housing: 7.75" | Shaft: 30mm (1.18")
- Deck: 60"
- 72.8 in. (184.9 cm)
- Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- 12-gallon (45.4-L)
- Curb: 1249
- Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.| 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- 140
- 560
- 2240
- 95
- 60
- Fabricated
- Kohler
- $15,999.00
/Daily - Nashville, Tennessee
- Rental
- 0014384
- 2023
- Exmark
- Lazer Z S-Series EFI LZS749AKC604A1
- 412377274
- RED
- 27.00
- 3.20
- Gas
- Available
- 72.8 in. (184.9 cm)
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- 140
- 560
- 2240
- 95
- 60
- Fabricated
- Kohler