Rental Price -$125.00
2019 Exmark Turf Tracer X-Series EFI TTX650EKC604N0
TURF TRACER X-SERIES EFI
Good News: Your search for the best walk-behind just ended.Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you’re looking for a large walk behind with all of the bells and whistles or something a bit more modest, the Turf Tracer EFI X-Series is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They’ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. These EFI mowers are available with 52- or 60-inch cutting decks.
Features may include:
ECO-FRIENDLYReduces fuel consumption, fewer emissions and carbon footprint.
FUEL SAVINGSDelivers up to 25% in fuel savings.
REDUCE GREEN HOUSE GASESFuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
EASY TO STARTEasy start in any altitude or climate condition (no manual choke).
ENGINE EFFICIENCYClosed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
SEQUENTIAL FUEL INJECTIONDelivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- 2019
- Exmark
- Turf Tracer X-Series EFI
- TTX650EKC604N0
- Walking
- Model: ECV650 | Brand: Kohler® | Series: Command™ EFI
- 3,600 rpm
- Heavy-duty canister air filtration system
- 694
- Engagement: Electromagnetic 200 ft-lbs clutch.
- Electronic Fuel Injected
- Gas EFI
- Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54cm) tapered shafts. | Wheel Release: Allows unit movement without engine running. | Hydro-Drive
- Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Lever-actuated mechanical compression.
- Caster: 11 x 4.0-5, smooth tread, semi-pneumatic. | Drive: 18 x 8.5-8, 4-ply Turf Master®
- Drive: 18 x 8.5-8, 4-ply Turf Master®
- 12-volt battery with 20-amp alternator.
- Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
- Blade: Approximately 18,500 fpm.
- Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- 60"
- 45.0 in. (114.3 cm) | Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- Blade: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- 104.8 in. (266.2 cm) | Blades: 3 Blades at 20.5"
- 72.0 in. (182.96 cm)
- 5-gallon (18.9-L) fuel tank.
- 840
- Standard Features: Enhanced engine hour meter | Casters: .38" thick caster yoke arms
- Manual lift with hairpin from hole to hole for position adjustment. | Floating Deck | Full-floating UltraCut Series 4. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- 125
- 500
- 2000
- 85
- 60
- Fabricated
- Kohler
- $125.00
/Daily - Nashville, Tennessee
- Rental
- 0006711
- 2019
- Exmark
- Turf Tracer X-Series EFI TTX650EKC604N0
- 402794929
- RED
- Kohler ECV650
- 21.00
- 1370.10
- Gas
- Available
- 72.0 in. (182.96 cm)
- 45.0 in. (114.3 cm) | Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- 125
- 500
- 2000
- 85
- 60
- Fabricated
- Kohler