2017 Exmark Turf Tracer S-Series TTS600GKA483E0
Made-to-order performance in a floating-deck, hydro-drive mower.With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
Features may include:- New Electric Clutch
Proven to be among the most durable and reliable in the business, Exmark’s superior electric clutch technology allows for easier and faster belt servicing.
- Forget Flats
Standard 9” x 3.5-4” smooth-tread, semi-pneumatic front caster tires virtually eliminate tire repair.
- Hour Meter Comes Standard
Improve maintenance records and track service intervals for longer life.
- Patented Enhanced Control System (ECS)
Recent university tests showed landscape professionals prefer our control system to all others on the market.
- Propane
An eco-friendly, lower cost fuel reduces operating expenses versus typical gas-powered mowers.
- Floating Deck
Full-floating UltraCut™ deck. Side discharge standard, with molded discharge chute and option to bag or mulch.
- 2017
- Exmark
- Turf Tracer S-Series
- TTS600GKA483E0
- Riding
- FS600V
- Kawasaki®
- Carbureted
- 3,600 rpm | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
- 603 cc.
- Standard Engine Manufacturer's air filter
- Gas Carbureted
- 73.7 in. (187.2 cm)
- 59.5in. (151.1 cm) | Cutting Deck: 48"
- 42.0 in. (106.7 cm) | Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- Deck: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
- 3 Blades at 16.25" Length | Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- Blade Tip Speed: Approximately 18,500 fpm.
- Electromagnetic 105 ft-lbs clutch.
- 12-volt battery with 15-amp alternator.
- Standard; Lever-actuated mechanical compression.
- Hydro-Drive | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
- Allows unit movement without engine running.
- Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Deck Lift: Manual lift with hairpin from hole to hole for position adjustment.
- 5-gallon (18.9-L) fuel tank.
- 2.5 bushels (20 gallons)
- 16 x 7.5-8, 4-ply Turf Master®
- 16 x 7.5-8, 4-ply Turf Master®
- .38" thick caster yoke arms | Front Caster Tires: 9 x 3.5-4, smooth-tread, semi-pneumatic.
- 606 lbs.
- Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- 115
- 460
- 1840
- 75
- 48
- Fabricated
- Kawasaki
- $115.00
/Daily - Nashville, Tennessee
- Rental
- 0004550
- 2017
- Exmark
- Turf Tracer S-Series TTS600GKA483E0
- 400995458
- FS600V
- 1233.00
- Gas
- Available
- 59.5in. (151.1 cm) | Cutting Deck: 48"
- 42.0 in. (106.7 cm) | Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- 115
- 460
- 1840
- 75
- 48
- Fabricated
- Kawasaki