Selling Price -
$13,499.00
No Description is Available for this Unit
- 2024
- SCAG Power Equipment
- Aerstorm
- AS30-23CV
- General
- CV732 | Heavy-duty industrial/commercial | 4 cycle gas, twin-cylinder, air-cooled, OHV, vertical shaft engine | Aerator Type: Plug-style aeration. Mid/under-belly mount.
- Kohler Command Pro
- 23 HP
- 40.3 ft-lbs. (peak)
- 747 cc (45.6 cubic inch)
- 2 cast-iron sleeves
- Mechanical type governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1800 rpm (±150 rpm)
- Hydro drive with two variable displacement pumps and two cast-iron high-torque wheel motors for independent control of each drive wheel
- Twin lever steering control with individual control to each wheel
- Lever actuated linkage to brakes on both drive wheels
- 18 x 6.5 - 8 four-ply pneumatic tubeless, radius edge
- 13 x 6.5 - 6 Flat-Free (semi-pneumatic)
- Drive Wheel Motors: Two Parker TG 14.5 cu. inch cast-iron high torque wheel motors
- Starter/Electrical/Charging System: "12 volt ""maintenance-free"" sealed battery with alternator, solid state ignition with key start. 15 amp charging system, regulated."
- Fuel Pump Group: Integral fuel pump with inline fuel filter, internal fuel line vent; float feed; two barrel, adjustable idle, afterfire solenoid. | Oil Pump Group: Full pressure lube, with full-flow filter, 2 quart oil capacity | Hydro Pumps: Two Hydro-Gear PG Series 10cc pumps with dump valves for movement without running engine; one cooling fan
- Dump Valves: Allows for movement without engine running
- Operator Platform: Heavy gauge steel with extruded star pattern for no-slip footing. Dual adjustable suspension for operator comfort level preference. | Operator Comfort Pad: Large heavily-bolstered operator cushion can be easily removed without tools for access to hydraulics
- Forward Speed Range: 0 up to 7.0 mph | Reverse Speed Range: 0 up to 3.0
- 1/4" steel
- 1.25" heavy-duty, straight motor shafts
- Safety Group: Footplate-actuated operator presence system interlock to engine killFootplate-actuated operator presence system interlock to engine kill
- 51.2"
- 68.6"
- 49.8" | Aerating Width: 30"
- Aerating Depth/Adjutsment: 1” to 4” in 1/2” increments. Simple and intuitive depth selection pin with easy-grip rubber knob
- 5.5 gallon (20.8 liters) tank with molded-in cup holder
- Air Intake Group: Large capacity 2-stage canister air filter | Exhaust Group: Single. exhaust canister muffler | Hydro Fluid Cooling Group: 3.0 qt. capacity cooling reservoir; uses SAE 20W50 fluid and 10 micron filter | Wire Harness: 14 and 16 gauge wire | Tine activation and Pressure:Hydraulic tine engagement (raise and lower) via a foot-activated switch. Tine activation switch on the instrument panel prevents accidental engagement/disengagement while working or transporting. Adjustable hydraulic down-pressure helps to penetrate even the hardest and driest soils to ensure effective aeration performance in all conditions.
- 48 self-cleaning, replaceable, steel coring tines
- $14,542.00
- $13,499.00
- Nashville, Tennessee
- New
- 0014065
- 2024
- SCAG Power Equipment
- Aerstorm AS30-23CV
- V9200308
- ORANGE
- 23.00
- 0.00
- Gas
- Available
- 49.8" | Aerating Width: 30"
- 51.2"